Removing a popcorn ceiling can be a difficult task. Still, it’s worth it if you’re looking to update your home. Here are the steps you need to take: Start by scraping off as much of the popcorn ceiling as possible using a putty knife or drywall saw. Be careful not to damage the underlying surface!
Once most of the popcorn has been removed, use a vacuum cleaner to remove any remaining bits. Apply an adhesive remover to the surface and let it sit for 15-20 minutes. Scrape off the adhesive remover, and any remaining popcorn with a putty knife or drywall saw. Finally, wipe down the surface with a damp cloth.
If your popcorn ceiling is in good condition, but you want to change the color or texture, you can repair it yourself using a joint compound. Here are the steps: Mix the joint compound according to the instructions on the package.
Apply a thin coat of joint compound to the surface and let it dry for 24 hours. Repeat this process until the desired coverage is achieved. Finish by sanding down the surface and priming it with paint primer.
One of the main reasons popcorn ceilings start to peel off is that they aren’t properly sealed. Here are the steps you need to take to prevent this from happening:
Start by sealing the seams and cracks in the ceiling with a sealant or caulk. Then, apply a coat of paint primer to the entire surface. Finally, apply two coats of paint to the ceiling. Make sure to use high-quality paint that is designed for textured ceilings!
If you’re searching for stucco repair in El Paso, TX, at Engel Coatings, we understand how big of a task getting your stucco surfaces restored is. That’s why as professionals, we provide high-quality services to take care of all your needs.
Don’t hesitate to reach out now to get a free assessment and estimate for your project. We also offer stucco repair in Las Cruces, NM.